What micron screen comes standard when purchasing this gascolator?
The screen size for this ACS Gascolator is 122 microns.
Can this ACS Gascolator be used with the Lycoming / Bendix Fuel Injection system? The fuel pressure would be 25 to 30 PSI....wondering if the higher fuel pressure is an issue. Thank you!
This particular gascolator is not recommended for use with fuel injected systems. However, ACS does manufacture part number 05-04248 (ACS HIGH PRESSURE GASCOLATOR). The high pressure gascolator is rated for use in systems up to 50 PSI.
What are dimensions and overall height of this ACS Homebuilders Gascolator?
Approximate height is 4-1/2". Approximate diameter of cylinder is 2-1/4".
What is the part number for a replacement gasket for the ACS Homebuilders Gascolator?
Use part # 06-00441.
Regarding Part # 10580: What is the pipe size of the factory fuel drain that is screwed on it?
The unit has an 1/8" NPT threaded drain valve.
What is the max continuous fuel pressure for this ACS Homebuilders Gascolator?
The max continuous fuel pressure would be 3lbs for part # 10580. If you are looking for a gascolator with a higher fuel pressure, take a look at P/N# 05-04248, this would have a 40lb continuous fuel pressure.
What is the diameter in the area where the pipe ports are? What is the diameter of the gascolator bowl?
The diameter of where the inlet and outlet ports is 1" and the top port is .8". The diameter of the gascolator bowl is 1.875".
What is the volume of the ACS homebuilders gascolator?
Maximum capacity of the bowl is 3.3 oz
What is the volume of the ACS homebuilders gascolator (Part # 10580)?
Maximum capacity of bowl: 3.3 OZ
What is the thread specification of ACS homebuilders gascolator Part #10580 ?
The fuel inlet and outlet are 1/4" NPT, and the primer and drain ports are 1/8" NPT.